Microprocessor KF Moisture Titrator – 2760 is the finest volumetric titrator available. It uses the latest microcontroller technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility. The system has user friendly prompts which guide you throughout the titration process. This titrator eliminates the use of conventional delicate and fragile glass burettes and plunger systems. It uses a highly sensitive motorized dispensing system for precise control of titrant volumes. This titrator analyses the moisture concentration of liquid samples, powder, fine particles and fiber samples that are soluble in alcohol or solvents. The moisture content is displayed in ppm, %age and mg H O.

The system has 20 soft touch membrane type keys for ease of operation. Complete alphanumeric keypad is provided so as to feed the values of sample, density, titer factor, date, time etc. The End Point indication is given by both visual LED and audible alarm. The titrator has the facility for automatically calculating the titer factor of the Karl Fischer reagent. It uses the repeated averaging method so as to give the most accurate titer value. It can store 90 user defined setup files for ease of operation and final results of 300 titration . The internal battery backup provision has been made to store the results and the other titration parameters even if the instrument is switched OFF. Provision for external printer/PC attachment is available so that any of the stored results or the calibration and validation reports as per pharma compliance can be printed even at a later stage.

Measuring Range	100 ppm to 100% of moisture
Measuring Method	Karl Fischer Volumetric Titration method.
K.F. Dispensing	Highly sensitive motorized dynamic dispensing system
Resolution of Titrant Volume	0.01 ml
Indication of Titrant Volume	0.00 to 99.99 ml on display
Moisture content calculation (Automatic)	%age : (0.00 to 100%) ppm :: (100 to 999999) mg H2O : (0.00 to 999.99)
KF Titer Factor	In-built Automatic KF Titer Factor calculation facility
End Point Alarm	Visual LED and Audible Alarm
Wait Time for End Point Alarm	Adjustable (1 to 99 seconds)
Dispensing Pump Calibration	Available through Key board
Key Board	20 keys soft touch membrane type
Sample Storage	Upto 300 samples
Display	40 x 4 Line Alphanumerics LCD Display
Clock	In-built clock with date & time display
Stirrer	In-built Magnetic stirrer with adjustable speed
Reagent Bottle	3x250ml bottle for KF Reagent, Methanol & Calcium Chloride
Printer /PC Interface	Through RS232 for serial printing using 80 column Dot Matrix Printer
Power Supply	230V A.C ± 10% 50 Hz.
Dimensions	L 362 x B 295 x H 180 mm (Approx.)
Accessories	* Dual Platinum Electrode * Titration Vessel * Built-in Magnetic Stirrer * Teflon Coated Magnetic Stirring Capsule * 250ml Bottle for Methanol * 250ml Reservoir Bottle for KF Solution *25ul Syringe * 250 ml Bottle for Calcium Chloride * Adaptor for KF Reservoir *Adaptor for Acetone Reservoir Bottle * Set of Dispenser Tubes * Set of Connecting Tubes * Main Lead *Instruction Manual

Note : Specifications are subject to change due to continuous improvements.

Auto Karl Fischer Titrimeter – 761 is an automatic apparatus designed to carry out Karl Fischer Titrations for accurate determination of moisture content in various samples.  On pressing the START button, the titration starts and the KF reagent is added automatically from the burette, through a solenoid valve into the titration vessel. As soon as the end point is reached, the titration is stopped automatically by the Control Unit. It has fully solid state circuitry incorporating advanced IC technology.

Titration unit contains the magnetic stirring mechanism and the solenoid valve assembly. The cabinet is designed to serve as a titration stand.

Karl Fischer method for determination of moisture content is used in pharmaceutical and drug manufacturing industries, food stuff, sugar, wood, paper and textile industries, petroleum refineries, chemical and fertilizer units etc.

CONTROL UNIT
Display	Array of 10 LEDs
Timer	Adjustable Timer
Buzzer	Yes
Sample Size	1-50 mg of Water
K.F.Dispensing Resolution	0.05 ml.
Measuring Electrode	Dual Platinum
Indications	RUN} ADD } Display in Auto Mode END}
Detection	Current sensing by electronic control
Dimensions	L340 X B250 X H125 mm. (Approx.)
Weight	2 kg. (Approx.)
TITRATION UNIT
Titration Cell	Air Tight 200ml.
Stirrer	Variable speed magnetic stirrer with On/Off control
K.F.Flow	Automatic Sensitive Control Valve for KF Reagent
Burette	Pressure filling auto zero burette with 0.05 ml resolution
Power	230V AC + 10% 50Hz, AC
Dimensions	L325 X B180 X H98 mm (Approx.)
Weight	3 Kg. (Approx.)
Accessories	Burette (Clear Glass) 10 ml * Reservoir Bottle 500 ml rubber bellow for air pumping Titration Cell Dual Platinum Electrode Magnetic Capsule Set of 2 Clamps Rubber Tubing Nozzle Instruction Manual

Note : Specifications are subject to change due to continuous improvements.

Microprocessor KF Moisture Titrator – 1760 is the finest volumetric titrator available. It uses the latest microcontroller technology and advanced engineering techniques so as to give enhanced accuracy and reproducibility. The system has user friendly prompts which guide you throughout the titration process. This titrator eliminates the use of conventional delicate and fragile glass burettes and plunger systems. It uses a highly sensitive motorized dispensing system for precise control of titrant volumes. This titrator analyses the moisture concentration of liquid samples, powder, fine particles and fiber samples that are soluble in alcohol or solvents. The moisture content is displayed in ppm, %age and mg H2O.

The system has 24 soft touch membrane type keys for ease of operation. Complete numeric keypad is provided so as to feed the values of sample, density, titer factor, date, time etc. comfortable. The End Point indication is given by both visual LED and audible alarm. The titrator has the facility for automatically calculating the titer factor of the Karl Fischer reagent. It uses the repeated averaging method so as to give the most accurate titer value. It has the storage facility of date, time, batch no. and final results of 20 titrations using the FIFO method. The internal battery backup ;provision has been made to store the results and the other titration parameters for a minimum of 1 month even if the instrument is not switched ON. Provision for external printer attachment is available so that any of the stored results can be printed even at a later stage.

Measuring Range	100ppm to 100% of moisture
Measuring Method	Karl Fischer Volumetric Titration method.
K.F. Dispensing	Highly sensitive motorized dispensing system.
Resolution of Titrant Volume	0.01 ml
Indication of Titrant Volume	0.00 to 99.99 ml on display
Moisture content calculation (Automatic)	%age : (0.00 to 100%) ppm :: (100 to 999999) mg H2O : (0.00 to 999.99)
KF Titer Factor	In-built Automatic KF Titer Factor calculation facility
End Point Alarm	Visual LED and Audible Alarm
Dispensing Pump Calibration	Available through Key board
Wait Time for End Point	Adjustable (1 to 59 seconds)
Key Board	24 keys soft touch membrane type
Sample storage	Upto 20 latest samples using FIFO memory
Display	8 digit bright red seven segment display.
Clock	In-built clock with date & time display
Stirrer	In-built Magnetic stirrer with adjustable speed.
Reagent Bottle	3x250ml bottle for KF Reagent, methanol & calcium chloride
Printer Interface	External Serial printer interface available.
Power Supply	230V A.C ± 10% 50 Hz.
Dimensions	360 x 295 x 175 mm
Accessories	Dual Platinum Electrode, Built-In Magnetic Stirrer, 250ml Bottle for Methanol, 10 Syringe, Adapter for KF Reservoir, Set of Dispenser Tubes, Bottle Container, Dust Cover, Titration Vessel with Teflon Cover, Teflon Coated Magnetic Stirring Capsule, 250 ml Reservoir Bottle for KF Solution, 250 ml bottle for Calcium Chloride, Adapter for Methanol Reservoir Bottle, Set of Connecting Tubes, Main Lead, Instruction Manual

Note : Specifications are subject to change due to continuous improvements.